Targa Wr 500 Voip Firmware Update

Leave a comment
Networks Training

Check out the latest firmware and software updates from PENTAX to enhance the performance of your digital camera. Firmware Update (Digital SL Cameras) Digital cameras. Windows / Mac. Relevant information or software (update). Self propagation. The Speedport router to change the configuration of a Targa WR 500 VoIP router. This shows that.

The newest Cisco ASA firewall 5500 series came out with software version 7.0, following the successful software version 6.x of the older PIX firewall models. The latest ASA software version is 8.x with intermediary versions of 7.1 and 7.2. In this post I will show you how to upgrade a Cisco ASA 5505 firewall from version 7.2(3) to version 8.0(2). The same approach can be used for any 5500 appliance series. To get the latest ASA software version, you must have a valid SMARTnet agreement which is basically a maintenance contract for your Cisco product.

Connect to the appliance (console or SSH) and verify the current running software version by using the show ver command:

ASA5505# sh ver

Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)


Compiled on Wed 15-Aug-07 16:08 by builders
System image file is “disk0:/asa723-k8.bin”
Config file at boot was “startup-config”

ASA5505 up 34 mins 42 secs

Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB

Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0 : address is 001e.7a86.1ea8, irq 11
1: Ext: Ethernet0/0 : address is 001e.7a86.1ea0, irq 255
2: Ext: Ethernet0/1 : address is 001e.7a86.1ea1, irq 255
3: Ext: Ethernet0/2 : address is 001e.7a86.1ea2, irq 255
4: Ext: Ethernet0/3 : address is 001e.7a86.1ea3, irq 255
5: Ext: Ethernet0/4 : address is 001e.7a86.1ea4, irq 255
6: Ext: Ethernet0/5 : address is 001e.7a86.1ea5, irq 255
7: Ext: Ethernet0/6 : address is 001e.7a86.1ea6, irq 255
8: Ext: Ethernet0/7 : address is 001e.7a86.1ea7, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255

Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : 50
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0

This platform has a Base license.

From the above output you can see that we are running Version 7.2(3) which is located in disk0 (disk0:/asa723-k8.bin). Also, the GUI device manager version (ASDM) is 5.2(3). Now, lets upgrade to version 8.0(2).

MORE READING:Cisco ASA 5520 Firewall - Throughput and Other Features

Assume that our internal network range is 192.168.1.0/24. Configure a TFTP server (you can use the free tftpd32) on an internal PC (e.g 192.168.1.10) and backup the current running software image from the firewall to your TFTP PC.

ASA5505# copy disk0 tftp

Source filename []?asa723-k8.bin
Address or name of remote host []? 192.168.1.10

Also, save the current running configuration. Just issue the show run command and copy all configuration output from your terminal window into a text file.

Now it’s the time to upload the new software image file to the disk system of the firewall. Assume that we have already downloaded the software file asa802-k8.bin and placed that on our TFTP PC.

ASA5505# copy tftp disk0

Address or name of remote host []? 192.168.1.10
Source filename []? asa802-k8.bin
Destination filename [disk0]? disk0:asa802-k8.bin

Accessing tftp://192.168.1.10/asa802-k8.bin…!!!!!! (truncated)
Writing file disk0:/asa802-k8.bin… !!!!! (truncated)
14524416 bytes copied in 118.210 secs (123088 bytes/sec)

MORE READING:Cisco ASA 5505 Network Port Interfaces

Since now we will have two image files on the firewall disk (old 7.2 and new 8.0 image files), we need to tell the firewall explicitly which image file to use when booting.

ASA5505# conf t
ASA5505(config)# boot system disk0:/asa802-k8.bin
ASA5505(config)# wr mem

Reboot the firewall in order to load the new software image file. (use the reload command). If everything works ok with the new image, you can delete the old one from disk0. (delete disk0:/asa723-k8.bin)

Arma 3, free and safe download. Arma 3 latest version: Epic realistic military sandbox shooter. Arma 3 is a massive military sandbox shooter with a focus on teamwork and user created moments. Arma 3 Download for system Windows 7/8/8.1/10/XP/Vista. Download Arma III. Arma 3 is a hardcore FPS created by developers from Czech Republic. The game is really insanely immersive and that’s a great reason to do Arma 3 download. If you’re done with all those modern, generic call of duty-like FPS games you found a great solution to your. Arma 3 pc download free.

The new ASA version 8.x uses the newest Device Manager (ASDM) version 6.x. You can download the new ASDM software from Cisco and upgrade that as well (using the same steps as above).

Related Posts

  • Password Recovery for the Cisco ASA 5500 Firewall (5505,5510,5520 etc)
  • Cisco ASA 5505, 5510 Base Vs Security Plus License Explained
  • Cisco ASA 5500-X Firewall Security Levels Explained
  • How to Block HTTP DDoS Attack with Cisco ASA Firewall
  • How to Block Access to Websites with a Cisco ASA Firewall (with FQDN)

How to Update SilverCrest Device Drivers Quickly & Easily

Tech Tip: Updating drivers manually requires some computer skills and patience. A faster and easier option is to use the Driver Update Utility for SilverCrest to scan your system for free. The utility tells you which specific drivers are out-of-date for all of your devices.

Step 1 - Download Your Driver

To get the latest driver, including Windows 10 drivers, you can choose from a list of most popular SilverCrest downloads. Click the download button next to the matching model name. After you complete your download, move on to Step 2.

If your driver is not listed and you know the model name or number of your SilverCrest device, you can use it to search our driver archive for your SilverCrest device model. Simply type the model name and/or number into the search box and click the Search button. You may see different versions in the results. Choose the best match for your PC and operating system.

If you don’t know the model name or number, you can start to narrow your search down by choosing which category of SilverCrest device you have (such as Printer, Scanner, Video, Network, etc.). Start by selecting the correct category from our list of SilverCrest Device Drivers by Category.

Need more help finding the right driver? You can request a driver and we will find it for you. We employ a team from around the world. They add hundreds of new drivers to our site every day.

Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for SilverCrest. It is a software utility that will find the right driver for you - automatically.

Step 2 - Install Your Driver

After you download your new driver, then you have to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.

How to Open Device Manager

  • In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

  • In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose 'All Apps' -> swipe or scroll right and choose 'Control Panel' (under Windows System section) -> Hardware and Sound -> Device Manager

  • In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager

  • In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager

  • In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button

How to Install drivers using Device Manager

  1. Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

  2. Select the Driver tab.

  3. Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.

If you are having trouble installing your driver, you should use the Driver Update Utility for SilverCrest. It is a software utility that automatically finds, downloads and installs the right driver for your system. You can even backup your drivers before making any changes, and revert back in case there were any problems.

Try it now to safely update all of your drivers in just a few clicks. Once you download and run the utility, it will scan for out-of-date or missing drivers:

When the scan is complete, the driver update utility will display a results page showing which drivers are missing or out-of-date. You can update individual drivers, or all of the necessary drivers with one click.

For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.